VBS Module-LAD-Create Timeslots
Table of Contents
Revision History
Version | Date | Author | Designation | Description of change |
1.0 | Aug 30, 2022 | @Anil.Choudhary | Sr. Business Analyst | Draft |
Introduction
This sections describes how to configure timeslots for a particular location
Create Timeslots
1. Navigate to the Create Timeslot page by clicking on Create Timeslot left navigation bar.
2. Select the From Date and To Date from the respective calendar fields.
The checkbox for selecting days will be enabled based on the selected date range. Users can use the checkbox to select the days for which the configuration is to be applied.
For eg: If user made the following selection:
From Date - 06/07/2022 (DD/MM/YYYY)
To Date - 31/07/2022 (DD/MM/YYYY)
Days selected - Mon, Tue, Wed, Thu
Then the configuration will be applicable to all Mondays,Tuesdays, Wednesdays and Thursdays in the date range 06/07/2022 - 31/07/2022 when the user submits.
3. The SUBMIT button will be enabled now. If the user clicks on submit now, the timeslots in the selected range will be configured with 0 value in all fields.
4. User has the option to provide the planned quantity of:
Drop Off Export
Drop Off Import
Drop Off Empty
Pickup Export
Pickup Import
Pickup Empty
containers, that can be accommodated for each timeslot.
5. User has the option to provide Additional Criteria for each timeslot
5.1 Click on the configure icon corresponding to a timeslot
Additional Criteria is applied section wide(Drop Off/Pick Up)
For eg: In fig, the configuration will be applicable only for Drop Off section of 00:00 - 00:29 timeslot.
5.2 In the popup user can:
a. Provide the number of Reefer containers that can be accommodated in that timeslot
b. Select peak configuration
5.3 Click on done
5.4 Exclamation icon will be shown to depict peak configuration
A red dot will be shown on the configure icon to depict that a reefer quantity has been set.
6. User has the option to apply data for multiple timeslots at a time.
6.1 Enter value for Export, Import, and Empty for Drop Off and Pickup in the marked field(s).
There are three cases. User enters:
a. Non zero value: The entered value will be applied
b. zero: 0 value will be applied
c. blank/empty: 0 value will be applied
6.2 Click on any of the marked configure icons to provide Additional Criteria.
6.3 In the popup user can:
a. Provide the number of Reefer containers that can be accommodated. The same three cases mentioned in 6.1 are applicable here as well.
b. If the user wants to provide a peak configuration, then make the required selection using the checkboxes. The peak configuration provided in the checkboxes will be applied as-is.
6.4 Click on done
6.5 Select the timeslots for which the above values need to be applied using the checkboxes marked in the image.
Click on apply button.
6.7 The values will be applied for the selected time slots
7. Click on submit button
8. Click on confirm button
8. User will be navigated to Timeslots page.