VBS Module-LAD-Edit Timeslots
- Anil.Choudhary
Analytics
Table of Contents
Revision History
Version | Date | Author | Designation | Description of change |
1.0 | Aug 30, 2022 | @Anil.Choudhary | Sr. Business Analyst | Draft |
Introduction
This section describes editing an already configured timeslot.
Edit
Edit Timeslots of a Day
1. Navigate to the Timeslots page and select the Day option from the Period dropdown.
2. Click on the edit button at the bottom of the page.
3. User can modify the Planned quantity of any section of a timeslot. However, the value should be greater than the currently booked quantity.
4. User can modify the Additional Criteria.
4.1 Click on the configure icon corresponding to the required timeslot and section(Drop Off/Pick Up)
4.2 User can modify:
a. Planned quantity of Reefer (value should be greater than the currently booked quantity).
b. Peak Time Configuration
4.3 Click on done .
4.4 The Additional Criteria of the timeslot will be modified.
5. User has the option to modify data of multiple timeslots at a time
5.1 Enter value for Export, Import, and Empty for Drop Off and Pickup in the marked field(s)
There are three cases. User enters:
a. Non zero value: The entered value will be applied
b. zero: 0 value will be applied
c. blank/empty: Values will not be modified
5.2 Click on any of the marked configure icons to provide Additional Criteria.
Additional Criteria are provided section-wise (Drop Off/Pick Up).
ie. user should use the configure icon in the Drop Off section to input Additional Criteria for Drop Off and vice versa.
5.3 In the popup user can:
a. Provide the number of Reefer containers that can be accommodated. The same three cases mentioned in 5.1 are applicable here as well.
b. If the user wants to provide a peak configuration, enable the switch button. Then make the required selection using the checkboxes. The configuration provided in the checkboxes will be applied as-is.
5.4 Click on DONE
5.5 Select the timeslots for which the above values need to be applied using the checkboxes marked in the below image.
5.6 Click on APPLY button.
5.7 The values will be applied for the selected time slots
6. Click on the save button to save the modifications.
Click on the cancel button to drop the changes and go back to the day view page.
7. Click on the confirm button.
8. The modifications are saved once the user clicks on the CONFIRM button. The user is navigated to the day view page.