Table of Contents
| Table of Content Zone | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Revision History
Version
Date
Author
Designation
Description of change
1.0
MAY 11, 2023
Sr. Business Analyst
Draft
Introduction
This sections describes how to configure timeslots for a particular location
Create Timeslots
1. Navigate to the Create Timeslot page by clicking on Create Timeslot left navigation bar.
2. Select the From Date and To Date from the respective calendar fields.
The checkbox for selecting days will be enabled based on the selected date range. Users can use the checkbox to select the days for which the configuration is to be applied.
For eg: If user made the following selection:
From Date - 01/06/2023 (DD/MM/YYYY)
To Date - 30/06/2023 (DD/MM/YYYY)
Days selected - Mon, Tue, Wed, Thu
Then the configuration will be applicable to all Mondays, Tuesdays, Wednesdays and Thursdays in the date range 01/06/2023- 30/06/2023 when the user submits.
3. User has the option to provide the planned quantity for every timeslot duration respectively of:
Pickup Import
Pickup Empty
Drop Off Export
Drop Off Empty
containers, that can be accommodated for each timeslot.
4. User has the option to apply data for multiple timeslots at a time.
4.1 Enter value for Export, Import, and Empty for Drop Off and Pickup in the marked field(s).
There are three cases. User enters:
a. Non zero value: The entered value will be applied
b. zero: 0 value will be applied
c. blank/empty: 0 value will be applied
4.2 Select the timeslots for which the above values need to be applied using the checkboxes marked in the image.
Click on
| Status | ||
|---|---|---|
|
4.3 The values will be applied for the selected time slots
5. Click on
| Status | ||
|---|---|---|
|
6. Click on
| Status | ||
|---|---|---|
|
The timeslot configuration will not be applied for any day in the date range that has an existing appointment(s).
7. User will be navigated to Timeslots page.
In case the user is applying timeslot for long periods like a year, it might take a few minutes to get reflected in the system.
